Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 3 (2022)

Simple Fix For Tubes In Tubeless Tires

Featured source: Tony Bunniss, Webster, Minn.

FARM SHOW contributor Tony Bunniss has developed a method to keep tubes inflated when used in tubeless tires.

When Bunniss worked at a John Deere Lawn and Garden dealership, he noticed that many customers came in with tires and wheels modified to have a tube inside because people were tired of their tubeless tires losing air so often.

As the air went out of the tube, it would pull the valve stem into the wheel where he couldn’t reach it to inflate or deflate. Lawn and garden wheels and tires are especially prone to this problem because they are only used seasonally.

“Tubeless tires are fine on lawn and garden equipment when the tire is new and the rim is clean,” explains Bunniss.

“However, that equipment sits around for a long time. It needs to be moved every so often, or a leak will develop. The older the tire gets, the more often it needs air.”

After repeatedly having the valve stem problem, Bunniss came up with a simple solution.

“After I install a new tube and inflate it, I just attach a hog ring to the valve stem, preventing it from ever being sucked into the wheel,” he explains.

“Before I attach the hog ring, I grind off the sharp points so that I don’t puncture the stem while installing it.”

Contact: FARM SHOW Followup, Tony Bunniss, Webster, Minn. ([email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.