Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 5 (2021)

Gordy Kessler

Gordy Kessler, Wolverton, Minn.

“On one of my Allis Chalmers WD tractors the coil in the magneto would shut down when it got warm and I couldn’t start the tractor again until it cooled off. It would have been expensive to repair the magneto, so I fixed the problem by disconnecting all the wires to the coil, drilling a small hole in the magneto cap, and running a wire from a regular outside-mounted coil to the points. The only thing the magneto does now is open and close the points. You also have to run the wire from the outside coil to a resister to keep the points from burning or pitting, and the timing will be different with the outside coil. But once you get that adjusted, the engine never stops when it gets warm anymore. I hid the coil and resister up under the hood so the tractor still looks original. This fix has lasted for 15 years.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.