Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 3 (2021)

Work Table Lifted By Hydraulic Jack

Featured source: Bob Payne

To work on mowers, pressure washers, and other equipment that’s too heavy to lift, Bob Payne, Coldwater, Miss., bolted a lift table to the lift plate on a large hydraulic jack.

The 3/4-in. plywood deck has hinged 2 by 4 sides that can be latched shut. Car ramps make it easy to roll equipment onto the platform when it’s down. Then you close the sides and crank it up with the jack.

Once the lift table is at working height, Payne puts a sawhorse under each end and lowers the table onto them.

“I can use the lift table wherever I need it and it stores under a workbench. It’s easy to unbolt the table from the lift jack if you need the jack for other uses,” he says.

Contact: FARM SHOW Followup, Bob Payne, 65 Wallace Road, Coldwater, Miss. 38618.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.