“The 15-speed powershift transmission on my Deere 4960 tractor slipped whenever I pulled a heavy implement down the road in high gear. The dealer thought the clutch was worn out so he replaced it at a cost of about $8,000. The tractor then ran okay for about 1 1/2 years, but then the transmission started slipping again. The same problem happened on another one of my 60 Series tractors.
“Then a mechanic friend in Pennsylvania gave me some advice. He said powershift transmissions have a hydraulic valve that releases power to the transmission. When you push in the clutch the valve opens, and when you release the clutch it goes against a small aluminum stop that closes the valve. However, over time the valve wears against the housing and oil leaks out, which causes the clutch to lose pressure.
“He recommends using a 3 1/2-in. hand grinder to grind about 3/8 in. off the stop, which will allow the valve to close farther and increase the clutch pressure. I tried the idea on my 4960, and the transmission stopped slipping immediately.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.