Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 2 (2021)

John Dodge

John Dodge, North Port, Fla.

“I bought a used wood jointer and had to rewire it from a 3-phase motor to a single phase, which required a different switch. I didn’t want the machine starting up by me bumping it with my knee so I decided to make my own safety switch.

“A friend happened to be tossing out some drawer handles. I mounted 2 of them on either side of a metal switch plate so I could only turn on the switch with my finger. It worked. The handles just have to extend out further than the toggle switch. It’s handy because I can turn the switch off from either side or the middle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.