Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 4 (2020)

John Matthews

John Matthews, Welland, Ontario
John Matthews
Photo: FARM SHOW · Vol. 44, No. 4 (2020) · p. 33

“My son David enjoys finding ways to organize tools in his shop. He made a holder for oversized (1/2-in. shank) drill bits by drilling through 2 sheets of 14-ga. plate that were welded together. He drilled 28 holes for the shanks that are 33/64-in. wide, ground off the welds, and used 1/4-in. all-thread to separate the plates and to serve as legs. There’s a layer of foam at the bottom for bits that don’t have a shoulder.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.