Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 4 (2020)

David Simpler

Individual tip 1 of 2 from this reader’s published contribution.
David Simpler, Elkton, Md.

“There are times when a conventional C-clamp can’t be used to hold an object in place, such as when you’re welding something on a flat surface. So I welded a large nut onto the clamp, then torqued the clamp to hold the piece of metal. I can screw a bolt through the nut to apply pressure from another point. If I want to use the clamp at an angle, I use a second nut to adjust the clamp to the desired angle.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.