Mike Toppen, Allegan, Mich., tapped the back side of an old Jacobs drill press chuck with 5/8-11 thread, allowing him to also use his DeWalt cordless angle grinder as a right angle drill.
“By using the angle grinder with the threaded chuck and a drill bit, I can use one piece of equipment to do 2 different jobs,” says Toppen, who works for a mobile repair business.
“I carry my tools with me in my pickup and the fewer tools I have to carry around, the better,” he says. Toppen found the 1/2-in. drill press chuck in a box of junk that he bought cheap at a sale. He used a lathe to bore a tapered hole into the back of the chuck, and then tapped it with a 5/8-11 thread - the same thread found on the cordless angle grinder. Toppen says he’s surprised that DeWalt doesn’t make an adaptor chuck designed to convert an angle grinder drill to a right angle drill.
“Maybe it’s because angle grinders don’t operate with as much torque and the rpm’s are higher, limiting you to bits with higher cutting speeds.
“For example, a DeWalt 4 1/2-in. angle grinder like mine is designed to operate at 5,700 rpm’s, whereas large drill bits are designed to operate at a lower cutting speed with more torque. But my right angle drill conversion is still a handy tool for just drilling a hole through something in close quarters where a drill won’t fit.” Contact: FARM SHOW Followup, Mike Toppen, 3889 1/2 127th Ave., Allegan, Mich. 49010 (ph 269 673-5597; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.