Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 3 (2020)

Steve Faber

Steve Faber, Tiffin, Ohio

“I had a hitch that was slightly loose in the receiver tube, as they usually are. Besides the annoying rattle, the utility trailer swayed slightly but continuously. I sorted through my scrap metal until I found just the right thickness to take up the clearance. I cut and bent it to fit, with a small flange on top that keeps it from going in too far when installing. The pin goes through a hole in it to hold it in place. No more sway or rattle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.