Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 2 (2020)

Vise Mounts On Pickup Bumper

Featured source: Mike Peters

“I recently read a story in FARM SHOW about a portable bench vise that attached at hitch level to a pickup bumper. The operator had to lean over to use it. It prompted me to put together a portable bench vise that I can use while standing upright, which is much handier to use,” says Mike Peters, Harmony, Minn. The portable vise consists of an L-shaped length of square tubing with a round flat steel plate on top. The plate has holes in it to bolt on the vise. By pulling a pin from the receiver hitch, Peters can quickly move the vise to another vehicle. It can be stored behind the pickup seat or in a toolbox.

“I already had the vise, which was originally designed to rotate on a round metal base,” says Peters.

“I had a local welding shop put the square tubing and round plate together. Then I painted the tubing and vise yellow so that other motorists will see it whenever the pickup is parked.” Contact: FARM SHOW Followup, Mike Peters, P.O. Box 53, Harmony, Minn. 55939 (ph 507 381-6874; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.