“After accidentally breaking the spokes on one of the wheels on my Montgomery Ward 20-in. band saw, I made a new one using 2 pieces of 3/4-in. thick plywood. I used Tite Bond III wood glue (www.titebond.com; ph 800 669-4583) to fasten a rubber strip to the wood.
“I marked a circle on the plywood and cut it out, then bolted a pulley to it, rigged a shaft, and mounted it flat on my wood lathe’s bed. By using a sanding plate on the spindle, I was able to make a perfectly round wheel. I then used the pulley to fasten the wheel to the saw.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.