Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 5 (2019)

David Simpler

Individual tip 1 of 2 from this reader’s published contribution.
David Simpler, Elkton, Md.
David Simpler
Photo: FARM SHOW · Vol. 43, No. 5 (2019) · p. 33

“I needed a low-cost way to protect the hydraulic couplers on my skid loader, so I cut up an old heater hose that I already had into 3 to 4-in. lengths that friction fit onto the coupler. I used 1-in. hose for the male coupler and 1 3/8 in. hose for the female coupler. The hoses keep water out of the couplers. Works great.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.