
“I tipped over a wheelbarrow full of wood going into my woodshed,” Hohl says.
“It was more an inconvenience than a big problem, but I thought of a way to keep it from happening again as I was picking up the pieces.” A 2-ft. long plank ramp leading into his woodshed had slipped off a narrow concrete ledge. The 5-in. drop stopped his wheelbarrow dead in its tracks and over the load went. Hohl’s solution was to bend a 3/4-in. lip at a 90-degree angle on one end of a 1/4-in. thick by 18-in. long piece of aluminum. Using heavy wood screws he attached the metal to the 2 by 10-in. ramp. The lip end extends about 4-in. beyond the end of the ramp, sliding over the wooden sill of Hohl’s woodshed entry door, holding the wood ramp securely on the concrete foundation ledge.
“It’s a simple idea that just required a big hammer and vise to bend the lip before I attached it to the ramp.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.