Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 4 (2019)

Orderly Oil Change Setup

Featured source: Howard Ewen, Jr.

Overhead oil tanks, drip collectors and organized filters keep Howard Ewen’s shop clean and neat, making oil changes a lot easier. With 4 IH 4586 diesels, around 30 Olivers, 5 or 6 farm trucks, 3 pickups and several pieces of homemade equipment, he goes through a lot of oil and filters.

“I have five 75-gal. oil tanks mounted on a rack above my head with a fill cabinet for pitchers and 2 1/2-gal. jugs mounted at one end of the rack,” says Ewen.

“Rack space at the other end holds a case of transmission fluid, ether windshield washer fluid, and other liquids.” Like most farmers, Ewen used to keep his oil in barrels with a hand pump on each. When he had a chance to pick up an old service truck bed with the tanks on it, he grabbed it.

“I have 4 tanks filled with different types of oil and one filled with solvent,” explains Ewen. A 2-in. outlet on the bottom front corner of each tank has an elbow with a 1 1/2-in. reducer on it and pipes that lead to ball valves above a fill shelf. The shelf is expanded metal with a catch tray beneath to collect drips and spills.

“Any drips from ball valves or containers drain into a 5-gal. bucket and are used for oiling parts,” says Ewen.

“Even a few drops at a time count up, and it keeps the shop clean.” The fill cabinet doors are sealed with rubber foam to keep dust from collecting on the pitchers and jugs. A large steel cabinet nearly 7 ft. tall and the width of the rack does double duty as filter storage and as a walkway for filling the oil tanks. A ladder on one end gives Ewen easy access. When one of the tanks runs out, he retrieves a barrel from nearby storage and lifts it into position above the tanks with his shop hoist.

“I made a harness for the barrel so it tips it forward,” says Ewen.

“Each tank has a 2-in. inlet on it at the rear. I lower the barrel’s faucet end into the inlet pipe and open it up. Once I loosen the bung, it empties out quickly.” Ewen’s wife Pat maintains inventory on the filters. When a filter is used, a slip of paper is filled out with the filter number and the date and dropped in a box. When filters go on sale locally, Pat pulls the slips and determines how many filters of various types are needed.

“We usually keep around 100 on hand,” notes Ewen.

“Having a place for them and always having them on hand makes maintenance of equipment easier to do.” Contact: FARM SHOW Followup, Howard Ewen, Jr., 6997 W State Rd. 8, Lacrosse, Ind. 46348 (ph 219 754-2365).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.