Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 2 (2019)

Jon Arms

Jon Arms, Brewster, Mass.

“I use a surplus fire extinguisher to add gear oil to gearboxes. I fitted it with a pressure hose and a 1/4-in. nip valve. It holds about 2 gal. of oil, added through the top nut that holds the handle and dip tube. Air is added through the snifter valve at the top beside the pressure gauge.

“It sure makes life easier when filling transmissions or differentials. I use a round key ring on a chain to hold the handle in the flow position. I have two of them, one used for gear oil and the other for hydraulic oil. When I was 15 and worked at a gas station, they had a large floor-mounted gear oil machine. I just downsized the idea to extinguisher size. Very convenient for a small shop.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.