Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 5 (2018)

Protecting Gator Axle Boots

Featured source: Bob Myracle

After having to replace the front axle rubber boots a second time on his Gator 825i due to tearing by sticks and other debris, Bob Myracle, Baxter, Tenn., came up with a simple way to stop the damage. He used pieces of vinyl floor molding, tying them in place over the boots with heavy-duty zip ties. The vinyl flexes so it doesn’t interfere with steering and hopefully prevents further punctures to the boots, which allows dirt and water into the flex joints. The factory shields just don’t provide enough protection. Contact: FARM SHOW Followup, Bob Myracle, Baxter, Tenn. (ph 931 858-3094; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.