“I used old 8-in. long railroad spikes to replace some of the worn-out teeth on a 10-ft. drag that I pull behind my roller harrow. The drag has 2 rows of teeth which are bolted to pipes. I got the leftover spikes for free after a nearby railroad track was rebuilt.
“I cut off the square head on each spike and welded a 5/16-in. dia. bolt in its place. Then I ran the spike through the pipe, welded a washer onto the bolt, and added a nut. I also bent the washer slightly to keep the spike from unscrewing. I’ve replaced my drag’s teeth this way for several years. Railroad spikes are very hard so they don’t wear out easily.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.