Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 1 (2018)

Paul Moore

Individual tip 2 of 2 from this reader’s published contribution.
Paul Moore, Batavia, Ohio

“Oil began forming on the brake pads on my 1955 Minneapolis Moline 435 Mini Mo tractor. Roller bearings on both sides of the brakes were worn, which knocked out the seal between the transmission and brake shoes and allowed oil to escape onto the shoes. Normally I would have had to split the tractor, remove the gearbox, and pull out a shaft so I could pull the seal out from the inside. Instead, I used an auto body dent puller to remove the seal from the outside. I drilled a hole in the seal and then used the dent puller to pull the seal to the outside. It popped right out. I then used a homemade spacer to install a new seal with a slightly smaller circumference in the hole. It saved me a lot of time and trouble.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.