“FARM SHOW ran a piece on a valve I made for a vacuum hose that sucks fine glass bead dust out of my bead blasting cabinet (Vol. 40, No. 6). A reader kindly contacted me and suggested that he had used a similar idea when working with wood shavings, but with the addition of a DustDoctor cyclone. I couldn’t find one in England so I made my own using a 7-in. clear plastic funnel. At the bottom I cast a block of poly to act as a base to mount it over a bucket. The air inlet enters the top of the funnel at a shallow angle, with a piece of thin plate an inch below it to control the direction of flow. My bleed valve remains in place so I can still regulate the amount of vacuum at the blast cabinet.
“It worked great the first time I fired it up. Total cost was just a few dollars and the benefit is a huge increase in vacuum cleaner bag life. So thanks to FARM SHOW and its readers.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.