Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 2 (2017)

Gasket Problem With V-10 Truck Engine Solved

Featured source: Mike Anderson

Mike Anderson, Chichester, New Hampshire, recently called FARM SHOW to tell us how he saved money repairing the V-10 gas engine on his Ford dump truck.

“The problem is that the gasket between the head and exhaust manifold is too thin and has very little ‘give’ to it,” says Anderson.

“As a result, in cold weather the exhaust manifold cools quickly and the gasket contracts, causing the bolts in the gasket to break off inside the block. The gasket then has to be replaced at a cost of about $1,300.

“This problem happened 3 different times on my truck’s engine. The last time I asked the dealer to install a different gasket that had more cushion, but he said the company wouldn’t approve of that. I said I don’t care what the company says because I can’t afford to keep replacing gaskets. I called the company to ask for a different gasket, but they said nothing else on the market would work on my engine.” So 1 1/2 years ago Anderson went to a local hotrod machine shop and paid $75 for a new Remflex Exhaust gasket (ph 866 641-7325; [email protected]).

“The Remflex gasket is a full 1/8 in. thick, which produces a cushioning effect so it won’t warp. And it can withstand engine temperatures up to 3,000 degrees,” says Anderson.

“Problem solved.” Contact: FARM SHOW Followup, Mike Anderson, Chichester, New Hampshire ([email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.