Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 2 (2017)

Portable Chainsaw Bench Clamp

Featured source: Stephen Nelson
Portable Chainsaw Bench Clamp
Photo: FARM SHOW · Vol. 41, No. 2 (2017) · p. 32

Stephen Nelson, Winston-Salem, N.C., made a portable chainsaw bench clamp to hold his chainsaw’s guide bar steady for chain tightening and hand sharpening. He started with a 10-in. long, 6-in. sq. wood block fitted with a screw clamp. A short 2 by 2 piece of scrap wood attached to the block stabilizes it.

“I just insert the end of the bar into the device and lift the bar slightly so the chain can turn, then tighten the clamp,” says Nelson.

“It can be easily placed on a bench or tailgate, and it can be easily lifted and turned around to work on the other side.

“It holds the bar level and is much more handy than sitting on the ground wrestling with the saw’s power head.” Contact: FARM SHOW Followup, Stephen Nelson, 207 Elaines Way, Winston-Salem, N.C. 27127 (ph 336 764-8929; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.