Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 5 (2016)

William Watner

William Watner, St. Marys, Kansas

“I came up with a method for pulling rubber-lipped oil seals out of vehicle components, like a rear main seal or a pinion seal on a differential.

“I took a screw with aggressive threads, like a sheet metal screw, and welded it to the end of a slide hammer. To pull a seal, I sharpen a small diameter punch to a sharp point and use it to poke a small hole into the metal part of the oil seal. Then I thread the screw on the tip of the slide hammer into the hole, making sure there are no clearance issues behind the seal. Once the screw is threaded in securely, I use the slide hammer to pull the seal out. It’s a very quick and easy method.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.