In the last issue of FARM SHOW a reader proposed using wire nuts to connect trailer pig tails and lights to make replacement easier. I heartily disagree. Wire nuts should not be used in an outside environment. Compared to the number of times such repairs are needed, the troubles they will cause will be greater. At minimum, if you use wire nuts or scotch locks, fill the end with silicone to keep moisture out.
“My rules for installing trailer lights: 1. To connect 2 wires, twist together, solder, and cover with shrink tubing. 2. For more than 2 wires, twist together, solder, and coat with silicone. 3. Always run a wire ground from all lights and/or brakes to the white wire on the pig tail. Remember, all light current flows back through the common wire so it should be 1 or 2 wire sizes bigger than the hot wires. Brakes need a separate ground return. 4. On the tow vehicle, run a ground wire back to the engine from the light connector. Don’t depend on the tow vehicle frame for ground integrity. Rust is everywhere.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.