Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 5 (2016)

Dale Bowen

Dale Bowen, Southington, Ohio

“I own a Bad Boy 60-in. zero-turn mower which has worked fine for many years. But lately I was having trouble moving the throttle control until the engine warmed up. That’s because the plastic jacket on the cable was too close to the hot engine. After the machine cooled down, the plastic would stick to the wire. I fixed the problem by removing the cable from the mower, cutting off the plastic jacket where it comes close to the engine, and spray painting that part of the bare cable with high temperature paint, then reinstalling it. Problem solved and I didn’t have to buy a new cable.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.