“I couldn’t add front weights on my tractor because the bolt hole in the mounting bracket was plugged with dirt, and I couldn’t screw the mounting bolt in tight. Using a screwdriver, I was able to clean some dirt out of the bolt hole and casting nut but not the threads. I could have used a commercial thread-cutting die to clean out the threads, but my newer-style tractor uses metric bolts and there’s no store in my area that carries metric dies.
“To solve the problem, I used my circular saw to cut 1-in. long grooves into the bolt threads at three different places, cutting the grooves slightly deeper than the threads. As a result, any dirt will stay in the grooves and not in the threads. The grooves don’t affect the performance of the bolt at all and they give the dirt somewhere to go.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.