“I bought a 7-ft. wide, 3-pt. mounted Deere snowblower about 3 years ago. Upon receiving it I realized the snowblower was too heavy to move by myself, so I built a dolly for it,” says Douglas Fisk of Mondovi, Wis. The dolly is made from welded-together 6-in. channel iron and measures 7 ft. wide and 46 in. deep. It rides on 7 steel caster wheels.
“With the dolly I can place the snowblower where I sometimes couldn’t maneuver the tractor with the snowblower on it,” says Fisk.
“It maneuvers well on cement and blacktop.
It’s only 8 in. wide in the upright position so during the offseason it takes up very little space. In the winter I use the dolly to push the snowblower from its storage place and position it for mounting on the tractor, which takes only 3 to 5 min.
“I found that steel rollers work the best. I bought the channel iron and dolly wheels used and spent a total of less than $50.” Contact: FARM SHOW Followup, Douglas Fisk, S269 Wergeland Road, Mondovi, Wis. 54755 (ph 715 926-4572).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.