
“Many times when I’m away from my shop I’ve wished I had a vise to use on some job. So, I came up with this vise-mounting bracket that works with any standard 2-in. receiver hitch,” says Connor Bishop, Guilford, Ct.
“I bolted a steel plate onto the vise and then welded the plate to a length of 2-in. sq. tubing. I also drilled a 5/8-in. dia. hole in the tubing to accommodate the hitch pin. Now whenever I’m away from the shop I slide the vise into the hitch, insert the hitch pin, and have a vise wherever my pickup is.” Contact: FARM SHOW Followup, Connor Bishop, 400 Moose Hill Rd., Guilford, Ct. 06437 (ph 203 313-5362; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.