“I recently retired but still operate a business that services engines. I needed an inexpensive hoist so I built one that sets outside my shop, but can pivot all the way around to set objects inside the shop through the doors. I just grab a chain and swing the hoist in either direction. The 12-ft. long I-beam on top of the hoist pivots on 3/8-in. bearings and can lift up to 2,000 lbs.
“The hoist is supported by a 6-in. dia. steel pipe that goes 4 ft. deep into the ground. The top of the chain is covered by a modified plastic bucket to keep the chain dry. I cut a 2 1/2-gal. sq. plastic bucket in half, keeping the bottom half. I cut a small hole in the bottom, slipped the chain hook through it, and attached it to the trolley. Then I sawed the cutout round plug in half, put the 2 halves back into the hole, and used Liquid Nail to seal it.
“It really comes in handy. I recently used the hoist to lift 30-ft. long steel beams off a trailer and then swing them inside the shop. It cost less than $1,000 to build. I’m willing to sell plans.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.