Larry McPhail loves his 4010 Deere with its 248 loader. However, he didn’t love the slow hydraulics – until he added a booster pump.
“The 4010 hydraulic system is underpowered for everything it has to do,” says McPhail.
“The tractor is equipped with a belly 1,000 rpm pto facing forward from the transmission. A friend suggested I mount an auxiliary pto-driven hydraulic pump there.” Mc Phail got a pump from Prince Manufacturing (ph 605 235-1220; www.princehyd.com). He fabricated a bracket for the pump and secured it to 4 existing holes on front of the transmission.
“The holes are for mounting a belly sickle mower on the tractor,” explains McPhail. With the pump in place, McPhail ran the pump’s intake hose to the drain plug on the transmission case. He found a cheap fix for mating the hose end’s hydraulic fitting to the drain’s 1-in. fine thread bolt.
“Deere has a fitting with fine thread on one end and hydraulic pipe on the other with a swivel in between,” says McPhail.
“It’s called a Seal Lock, and it cost just $2.78.” Once he mounted control valves on a bracket on the loader frame and ran hoses to the loader, he had the speed he was missing.
“It works great,” says McPhail. Contact: FARM SHOW Followup, Larry McPhail, 2855 H Street Rd., Blaine, Wash. 98230 (ph 360 366-5548; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.