Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 2 (2015)

Sam Long

Individual tip 1 of 2 from this reader’s published contribution.
Sam Long, Salvisa, Ky.

“We had a 1983 Chevy farm truck with a 350 engine. The rear bolt on the starter stripped out. A helicoil wouldn’t hold it due to the high pressure so I welded a grade 8 nut inside the hole, put a piece of 3/8-in. dia. steel threaded rod through it, and put a 3/8-in. nut on the other end to hold the starter. Worked great.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.