Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 1 (2015)

Ray Brubacher

Individual tip 1 of 2 from this reader’s published contribution.
Ray Brubacher, Wallenstein, Ontario

“We’re always fighting high pressure in the hydraulic hoses on our Quicke front-end loader when we try to connect the hoses in hot weather. The heat causes the oil in the hoses to expand which causes the pressure to build up. To solve the problem, I came up with this homemade tool that attaches to the loader’s female quick couplers.

“I pulled the inside components out of a regular Pioneer coupling, welded a nut into the threaded end of the coupling, and then screwed a 5/16 by 2-in. fully-threaded bolt with a T-handle into the nut. A few turns of the T-handle forces the internal pin into the female coupling and releases the pressure slowly and safely without blowing out the O-ring seals.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.