Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 1 (2015)

Cameron Messinger

Individual tip 2 of 3 from this reader’s published contribution.
Cameron Messinger, Hummelstown, Penn.

“I had trouble with hammer heads working loose due to handle shrinkage. I tried using a punch to drive in wedges, but soon the wedges would come out again and the heads would almost fly off.

“To fix the problem, I took the head off, removed the wedge, and put the head back on. I then tapped a small piece of pine shim (you can buy 10 or so at Lowes for a dollar or two) about the same size as the wedge into the hole where the wedge had been. Then I tapped the wedge back in beside the shim. No more loose hammer handles.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.