Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 1 (2015)

Theo Mattingly

Theo Mattingly, Fremont, Calif.

“Installing bearings on shafts usually requires heating the bearing. I use the hot plate from a drip-type coffee maker to heat them up. The thermostat on the hot plate will heat bearings to 180° F in about 30 min. Remember to put the coffee pot back - nobody likes cold coffee.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.