Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 1 (2013)

Dennis Strahle

Dennis Strahle, Eagle, Mich.

“I put together my own gen-set with an old engine I had and a 10K generator from Harbor Freight. Instead of putting a gas tank on the engine and letting the gas get stale from sitting for months or years of non-use, I attached a 4-ft. fuel line to the inlet side of the carburetor. When I need the generator, I grab a 5-gal. can of fresh gas off the shelf and insert the fuel hose into the fresh gas. The engine starts right up. Once the power comes back on, I pull the hose out of the gas can and let the engine burn all of the fuel in the hose and carburetor. I insert a bolt into the end of the fuel line to keep bugs and dirt out until the next time it’s needed.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.