Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 3 (2012)

Mark Schwengel

Mark Schwengel, Bowler, Wis.

“Loose muffler bolts caused hot exhaust to burn a 1-in. dia. hole on top of the bar oil reservoir on my 1998 Husqvarna 141 chainsaw. A local shop told me it couldn’t be repaired.

“So I went home and drained the remaining oil, stuffed some old panty hose in the hole, and used a utility knife to whittle the edges of the hole flat. I used a shop vac to suck out any dust chips and removed the panty hose. Then I cleaned the surface twice with alcohol and glued on a 1/16-in. thick aluminum patch with high temperature epoxy. Now 3 1/2 years later it’s still holding. The entire process took less than a half hour and cost less than $5.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.