Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 3 (2012)

Mark Conyers

Mark Conyers, Weatherford, Texas

“When needing to turn over an engine by hand, such as when adjusting valves or similar maintenance, many times there are obstacles in the way that prevent a straight ratchet handle from having room to swing. I got around this by cutting the ratchet head off a wrench and welding it to the end of a piece of pipe bent into a ‘J’ shape. I welded the handle to the other end. Now I can usually clear obstacles – frame, pulleys, accessories, etc. – and get a full stroke while turning an engine over. You can make it to whatever length you’re comfortable with.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.