Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 6 (2011)

Bill Moody

Bill Moody, Mountain City, Tenn.

Moody recently sent FARM SHOW photos of a tool he invented for doing metal roofing work.

“It lets me use a cordless screwdriver instead of a hammer and nails to do roofing work. Not only does it save time, but the screws hold better and there’s no mashed fingers from driving nails.

“The tool he made is designed to pre-punch holes in the ribbing. A cordless drill is then used to drive in a 1 1/2-in. roofing screw through each hole.

“The tool consists of a spring-loaded metal ‘striker’ on top of an ‘anvil’, which is welded to a curved handle with a golf club grip. The anvil is grooved at the bottom to match the V-shaped ribbing. To use the tool, the operator sets the anvil over the ribbing and then uses a hammer to lightly tap the spring-loaded striker, which drives a hole into the ribbing.

“It punches a perfect hole every time. One person pre-punches the holes and another person comes behind and inserts the screws. It works two to three times faster than using nails. As far as I know there’s no tool like this on the market to start screws in corrugated roofing, which I find quite surprising.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.