Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 6 (2011)

Harold David Rupard

Individual tip 1 of 2 from this reader’s published contribution.
Harold David Rupard, Winchester, Ky.

“When I tried putting a new starter on my 1997 Deere 6300 tractor, I found there wasn’t room for a wrench. I tried using a special tool borrowed from my Deere dealer, but it didn’t help. So I came up with my own solution. I used a bandsaw to cut a box end wrench in half and put the box end half on the nut. Then I used a cold chisel and hammer to tap around the nut until it came off.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.