Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 5 (2011)

Forge Furnaces Made From Beer Keg

Featured source: Brian Johnson

Brian Johnson turns steel cable into Damascus steel bars, bending and forging as many as 56 layers for strength and appearance. The steel bars, or “billets”, are used for making knife blades. He has also made a steel vise, anvil and a multitude of other tools out of the metal. To reshape the hard steel, he uses heating and forging furnaces that he built himself using a beer keg and a propane tank.

“My single burner forge furnace puts out more than 2,600°F," says Johnson. "The body is a 16-gal., stainless steel beer keg with castable refractory interior."

Making the flux-proof forging furnace was a more complex job. The easy part was cutting a hole for the fire chamber. The refractory cement had to be poured all at once.

"I cut one end off the beer keg and centered a cylinder for the fire chamber inside the keg," recalls Johnson. "Insulation anchors had to be welded inside the shell to anchor the refrac-tory material should it crack. I bought some anchors and made more, placing them every 6 in. on center. They give the refractory mud something to hold to while it cures."

Refractory material also had to be formed for the furnace mouth. An earlier furnace had a steel mouth, but it oxidized with heating and cooling. With this furnace, he made an outside form for the door and mouth with an inside square tube. Once the refractory cement was poured and cured, the form and the inside tube were cut away, and Johnson had a furnace with no interior steel to oxidize.

Johnson reattached the keg end, first fabricating 1/2-in. grooved rings in each edge. Using 3/8-in. thick, 1-in. bar stock, he made a steel ring to fit inside the two grooves for a tongue and grooved effect.

“I split the ring so it can expand and con-tract as the forge heats,” he says.

The forge sits on a 10-ga. steel cone with a shelf and door. The cone serves as both a base and storage for fluxes and other materials. Heavy-duty caster wheels provide mobility. Each wheel is mounted on a steel tube within a tube for easy height leveling.

He also fabricated a Venturi tube to feed the burner. He describes the Venturi as a tube within a tube that he slides back and forth to The 14-ft. boom sells for $1,790 plus S&H; the 20-ft. model for $2,990 plus S&H; and the 28-ft. model for $3,190 plus S&H. Contact: FARM SHOW Followup, Carl achieve the right mix of oxygen and fuel to the burner. Because he runs the propane at tank pressure, the flow of fuel pulls the air into the burner.

“I like a slightly fuel-rich flame,” he explains.

“If you have an oxygen-rich flame, you have more problems with oxidation.”

Johnson mounted a small electric fan at the end of the mouth. It blows a curtain of air across the handle of pieces being forged, keeping them cooler and easier to work with. It also disperses heat coming out of the forge, making it more comfortable to work around.

“The furnaces make it easy to work with metal, which I enjoy,” says Johnson.

“I make tools and Damascus knife billets, but not the knives. I let others do that.”

Contact: FARM SHOW Followup, Brian Johnson, 16777 County Rd. 751 N.W., Clear-water, Minn. 55320 (ph 320 558-6898).

Peters, Polar Mfg., P.O. Box 322, Taylor, B.C., V0C 2K0 Canada (ph 250 271-0554; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.