Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 5 (2011)

Boom-Mounted Welder Frees Up Shop Space

Featured source: Carl Peters

“Hanging your welder from a telescopic boom frees up shop space and makes welding jobs easier. The welder hangs above your work, so you don’t have to worry about trying to maneuver around everything,” says Carl Peters of Polar Mfg. The wall-mounted boom is free to swivel up to 180 degrees (optional brackets are available for up to 270 degrees). The welder hangs from a cable. To pull the boom out you just grab the welder and pull it to where you want it. By mounting the boom close to the shop door, it can be extended outside the shop for working on equipment parked just outside the door. Peters builds 3 sizes – 14, 20 and 28 ft. – and can custom-build other sizes as well. The 14-ft. model has a 2-stage boom and can retract to 8 ft. The 20-ft. and 28-ft. models have 3-stage booms and can retract to 8 ft. 8 in. and 12 ft., respectively.

“Since the boom sections are hollow, all welder leads and gas hoses can be tucked inside for a neat appearance. With your welder overhead, there’s no running into power cords or other items on the floor every time you move your welder.

“In a steel frame shop the boom attaches to a vertical column, such as a steel rafter. In a wood frame building, a separate column from floor to ceiling may need to be installed first,” says Peters “All the boom sections run on ball bearing rollers, which makes it easy to position the welder. You can also run power cords and air hoses through the boom sections.

“Another benefit is that your welder always stays cleaned up and out of the way, whether it’s in use or not.” The boom is designed primarily for 2-piece welders where the power source is separate from the wire feeder, says Peters.

“Most all-in-one welding units are too heavy for the boom. However, some all-in-one units can be used as the main power source and then all you need to do is add a remote wire feeder. That way you don’t have to upgrade the entire all-in-one welding unit.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.