Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 4 (2011)

Chuck Knipp

Individual tip 2 of 2 from this reader’s published contribution.
Chuck Knipp, Palco, Kan.
Chuck Knipp
Photo: FARM SHOW · Vol. 35, No. 4 (2011) · p. 36

“I made a rotating screw and nail holder by welding a piece of 3/4-in. sucker rod to an old disc blade to make a stand. Then I attached metal grain leg buckets to pieces of strap iron that fit over the sucker rod. Four buckets weld to each strap iron bracket, which has a 3/4 in. hole in it. I tack-welded large washers to the sucker rod to hold each set of buckets in place. They spin freely around the rod. It took only a couple hours to build but is a great way to organize screws, nuts, bolts, nails, staples and other small parts.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.