“The company I work for has a Cat 257 skid steer loader, and the glow plugs on it didn’t cycle properly.
“While testing it I found the glow plug relay was an open circuit, so I replaced it with a new Cat relay which I bought for $28. It cycled about twice, but then the glow plug quit working. The problem was the contact had burned off the armature of the relay.
“I tested the glow plugs and found they each draw about 22 amps. The relay had about a 5-amp contact. I replaced it with a Ford starter relay that we already had. The new relay easily switches more than 300 amps. I made a Z bracket out of 1/2-in. strap metal to offset the larger size of the Ford relay. Note: A 1980’s GM diesel glow plug relay would work, too.
“I added wires to the Ford relay with that plug into the Cat’s original relay socket.
“Later on I learned about an owner of a 26X Cat skid loader that won’t start during winter because the glow plugs don’t work. Seems Cat has a design problem.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.