“Many late model tractors have FWD on the front. Replacing the kingpin, or trunion bushings as they’re called, can be a difficult job if you try to knock them out with a hammer and chisel. I have taken several out by welding. Take a bolt and taper grind the head so it will fit inside the bearing on the axle housing. Use a 3/32 stick rod 275 All-State series (chrome rods). They’re expensive but work well. After welding the head in place, put a nut onto the bolt and weld it into place. Put a length of 18-24 tubing or bar stock to be welded at midpoint onto the nut. Use two hammers of some size to hammer on the bar. The bearings will come right out.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.