Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 1 (2010)

Roger Gutschmidt

Individual tip 1 of 2 from this reader’s published contribution.
Roger Gutschmidt, Gackle, N. Dak.
Roger Gutschmidt
Photo: FARM SHOW · Vol. 34, No. 1 (2010) · p. 37

He uses a simple trick to get bolts through openings where you can’t get your fingers inside. He wraps a piece of .035 welding wire tightly around a 5/16-in. bolt.

“I wanted it to fit a 3/8-in. bolt, but you have to go one size smaller than the size you need to keep the wire tightly wrapped. Then you just thread it on the bolt and, viola, you have a fishing tool that makes it easy to pull the wire and bolt through a hole. Afterward, you can turn the wire off when you’re done putting the bolt in place.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.