Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 3 (2009)

Swinging “Partition Door” Closes Off Room Inside Shop

Featured source:

Mark Musser, Beecher City, Ill., needed a tall work space in his shop building where he could work on big machinery during the winter. But he didn’t want to heat his entire shop. So he built a large swinging “partition door” out of lightweight, 3-in. thick, insulated siding taken from a refrigerated semi trailer.

The door measures 20 ft. wide by 15 ft. high and hinges on three large steel pins. When closed it forms a 20-ft. wide by 30-ft. long room, with an overhead door at the opposite end.

For access into the area when it’s closed off, Musser built a “walk-through” door made up of 6-in. wide strips of hanging and over-lapping carpet.

“The partition creates a small space where I can work on machinery. It’s like having a shed inside a shed,” says Musser.

“I got the reefer siding free from a friend who does demolition work at a truck salvage yard, so it didn’t cost much to build.

“I use four 500-watt spotlights and a small propane heater to heat the area. The partition folds back against one of the building’s walls when not in use.”

Contact: FARM SHOW Followup, Mark Musser, 2361 E. 1950 Ave., Beecher City, Ill. 62414 (ph 618 487-5837).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.