“My neighbor came up with this vent for plastic fuel cans. After draining and drying the inside of the can, drill a hole in location as per the drawing using a 1/2-in. drill bit. In-vert the can and shake out any drill cuttings (that’s why you need a dry can). Push a 3-ft. length of wire through the drilled hole and then out the filler spout hole.
“Remove the valve cap and core from a new tubeless tire stem and thread it onto the end of the wire. Pull the stem out through the vent hole.
“To vent the can while dispensing fuel, I simply take the cap off the stem.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.