Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 2 (2009)

Self-Adjusting Pipe Wrench

Featured source: General Tools & Instruments Co., LLC
Self-Adjusting Pipe Wrench
Photo: FARM SHOW · Vol. 33, No. 2 (2009) · p. 38

You can use this new self-adjusting pipe wrench with one hand. There’s no need to spin a nut to adjust the size of the opening between the jaws. It lets you quickly switch between different sizes of pipe.

A thumb trigger is used to open or close the spring-loaded jaw which pivots on a ratchet. Pulling on the trigger produces a ratcheting action that allows the jaw to self-adjust to different pipe sizes.

The wrench has an alloy steel handle with a heat-treated alloy steel head. When you push or pull the handle in one direction, the jaws automatically tighten in the other direction.

The wrench has a 2-in. maximum jaw capacity.

Sells for $41.50 plus S&H. Contact: FARM SHOW Followup, General Tools & Instruments Co., LLC, 80 White St., New York, New York 10013 (ph 212 431-6100 or 212 431-6499; [email protected]; www.generaltools.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.