Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 2 (2008)

Duane Thies

Duane Thies, Winside, Neb.

You can buy 12-volt electric scissor jacks for about $60 from several sources (www.northern tool.com; 800-221-0516). The jacks lift up to 2,000 lbs. and have a cord that plugs into a 12-volt power port and a control module on a cord that has up-down control buttons.

“These units work great as jacks, but they can also be used in many other ways by disassembling them. The working part of the jack is a 12-volt motor and gear reduction that drives a threaded rod through a threaded block. With a little imagination, it can be used on a utility vehicle, like a Deere Gator, to dump the box or raise and lower a blade, mower deck, or 3-pt. hitch. It can also be used to turn spouts, open and close slides, pull drawbar pins, operate levers, and so on. It can be adapted to anything with a 12-volt power source. The best thing about it is that it’s easier to install than using hydraulics.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.