Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 1 (2008)

Burton Graves

Burton Graves, Sandusky, Mich.

“I converted my White 4-row corn planter to a no-till planter by adding 17-in. dia. spring- loaded, fluted coulters off an International Harvester moldboard plow directly in front of the planter’s double openers. The coulters penetrate the ground and do a good job of cutting through trash. They cost very little. To each row, I welded a 6-in. piece of steel the same size as the plow beam and clamped the plow coulter to a bracket that holds one side of the planter unit, by turning offset on shank sideways. I made the change 18 years ago. I’ve worn out two or three sets of blades since then. The spring-loaded coulters can run over rocks without breaking anything.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.