Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 3 (2007)

Pete Peters

Pete Peters, Osler, Sask.

“I came up with a portable chainsaw sharpening vise by bolting a small vise to the top of a 3-ft. high steel pipe, which is welded into an old car wheel hub that serves as a stand.

“To provide more sharpening area, I welded in new material to lengthen the vise jaws by about eight inches. To sharpen the chain, I just the clamp it into the vise and use a file to sharpen the area inside the vise. Then I loosen the vise jaws and sharpen another section of chain until I’ve gone all the way around it.

“It really comes in handy because I can use it anywhere and even haul it in my pickup when cutting firewood in the woods. A metal tube welded onto the pipe serves as a handy place to keep saw files.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.